Ricoh SP 201n Guida di Installazione

1Software Installation GuideThis manual explains how to install the software over a USB or network connection.Network connection is not available for

104. From the CD-ROM menu, click [Network Quick Install (DHCP)].CTT1935. Read the entire license agreement carefully. If you accept its terms, click

114. From the CD-ROM menu, click [Network Quick Install (Fixed IP)].CTT1905. Read the entire license agreement carefully. If you accept its terms, c

127. If the procedure completes successfully, click [OK].If the procedure fails, click [OK] to return to the window displayed in Step 6. Try specifyi

133. Changing the IP Address SettingsChanging the IP Address Settings Using the Control Panel (SP 202SN/203SFN/204SFN/204SN only)Configuring the Machi

145. Press the [ ] or [ ] key to select [Off], and then press the [OK] key.If you change this setting, the machine automatically reboots itself befor

15Changing the IP Address Settings Using the Web Image MonitorStarting Web Image Monitor1. Launch the Web browser.2. In the address bar, enter "

16Configuring the machine's IPv4 address manually1. Launch Web Image Monitor and log in.2. Click [IPv4].3. Set [DHCP] to [Disable].CTT1674. Sp

17Changing the IPv4 Address Settings Using the Smart Organizing MonitorResetting Network SettingsTo change the IP address after moving the machine or

184. TroubleshootingUSB ConnectionThe USB cable may not be connected properly.Check that the USB cable is connected properly and is undamaged.The CD-R

19

21. Connecting the Computer and Installing the Software (USB Connection)Connect the machine and computer with the USB cable, and then click [USB Quic

© 2013EN GB EN US EN AU M135-863920

3Quick Install for USBInstalling the software.Do not turn the machine on until you have read how to do so.CTT136Do not connect the USB cable to the ma

46. Follow the instructions in the installation wizard.If a message to turn on the power and connect the USB cable appears, do the following:Turn the

52. Connecting the Computer and Installing the Software (Network Connection)Network connection is not available for models SP 200/200S/203S/203SF/204

6Before Installing the SoftwareTo install the software over a network connection, a Ethernet cable and the supplied CD-ROM are required. To automatica

7What is a DHCP Server?You can configure settings to automatically obtain the IP address from a DHCP server.A DHCP server is required on the network f

8Printing a network setting listBefore you install the software, print the network setting list to check the network information.It can take up to two

9Quick Install for NetworkFor SP 202SN/203SFN/204SFN/204SN models, specify an IP address using the control panel before installing the driver. For det